USED MIG Welder Flux Core Gas Gasless Inverter MIG MMA Lift TIG Welding Machine

Description

Home
Payment
Shipping
Return Policy
About Us
Contact Us
Feedback
USED MIG Welder Flux Core Gas Gasless Inverter MIG MMA Lift TIG Welding Machine
★★Suitable for experienced welders and novices★★
！！！Second-hand machine, function is normal,
non-quality problem can not be returned,
Please place your order carefully！！！
Product description
Look at the panel,it is easy to set the parameters. the mig130 supports with 1kg flux cored wire most perfectly to do the carbon steel welding without gas.
mig/mma ,gas/gasless all are available ,mma welding(3.2mm rod) 7018 1/8″ very well, also 6013 and 7018 3/32″
Using gas with 1kg solid welding wires .030"-.035"（0.8/1.0 mm ）to weld over .030"(0.8mm) thickness workpiece. also supports gasless welding,portable design 18bls.
【30A breaker suggested】
Lift tig mode is optional(need to buy extra tig torch,not included in this package).please find the tig torch as below
Great gift for DIY users,maintenance and repair and metal fabrication. energy conservation and environment protection to compare with transformer welders.
home use ,switching frequency is beyond audio range, which almost eliminates noise pollution
Buy with confidence as Reboot offer 30-day 100% satisfaction or money back guarantee and 3-year limited warranty,there is a warranty card comes together in the package,
please email us through that to get the consumables.
Parameter:
MIG/LIFT TIG/MMA STICK 4 in 1 WELDING MACHINE
Input power voltage: AC220±15% V
Rated input power capacity: 4.5KVA
Input current :16 A
Rated output current :130 A
Rated output voltage :25 V
Duty-cycle: 70%
Output current range :30-130 A
Output voltage range :15-19V
Insulation class : F
Protection class : IP21S
Dimensions: 415×273×310MM
Weight : 9.2KG
Efficient: 85 %
Wire feeder : Inside
Power factor cosφ 0.93
Welding thickness: ≥0.8mm
Diameter of wire: 0.8/1.0mm
Duty cycle:60%
Troubleshooting
1. Wire feed tension: Check the tension on the spooler. Is it set too tight or is the wire feed tension not set correctly?
2. Wire choice: Are you using .035” wire? We recommend .030-0.35" for best performance.
3. Stick out: Is your stick out too long? Your stick out should be no more than ½”.
4. Pull the trigger: To begin welding, pull the trigger on the MIG gun.
5. Proper grounding: The ground should not be attached to painted or coated metal.
USED Package Case 9.2kg (20.28bl) Package Include:
1pcs Power source USED Mig welder MIG130
1pcs cable +Earth clamp
1pcs MB15 Build in Mig welding torch
1pcs Flux cored wire 1kg without gas weld
1pcs 3m Welding gas hose
THIS ITEM DO NOT INCLUDE TIG TORCH !!!
The machine is guaranteed for 3 years,Within three months of receiving ,we provide free repairs ,seller affrod shipping fee .
if beyond three months ,repairs is also free, but buyer need to afford shipping fee for return .
pls no need worry to buy ! we provide all service of buying.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
💲 eBay has upgraded its payment management, you can use a variety of payment methods including credit cards!
💲  Payment must be received 3 days after the auction ends.
Unpaid disputes are filed on eBay for non-payable buyers.
💲  Import duties, taxes and charges are not included in the item price or shipping cost.
These charges are the buyer's responsibility.
💲 Remote areas need to pay additional shipping.
💲 If the freight item is not clear, you can consult online customer service
Delivery details
🚒 Shipping cost: Click the shipping and payment tab on the product detail page to see the delivery details.
🚒You can calculate the shipping cost by entering the required information.
🚒Transit time: The transit time varies depending on the shipping method.
🚒 Item Processing Time: The processing time for a specific order depends on the product type and stock status.
Mostly, processing time can within 24hours after payment did.
🚒
Processing time will be postponed during holidays or weekends！
Terms of sales
✔️
60-day store warranty:
All our product offer 60 days free warranty time,during this period,if our item got quality problem.We will exchange or replace item for customers without any fee.
✔️
3-year brand warranty:
All our product got 1 year store warranty,after 60 days free store warranty.During this time,if our item got quality problem,we can offer exchange or repair.
But buyer need to pay the ship back fee when we pay the re-ship fee.
✔️
1-week Return or exchange
All our item offer 7 days return peroid,defective or non-defective. Return must include all original package and accesorries, item must in good condition.
Defective item: customers first pay the shipping fee and ship back the item, we check and confirm, then we will offer full refund and the ship back fee.
Non-defective item: 7 days Unconditional return, buyer need to pay the ship back fee, and we will offer refund your payment, but not include shipping fee.
✔️
Please do contact us first by ebay message before any return or case.
About us
*
First-class talents and advanced equipment
S
mart Design with full digital control ,Constant voltage and synergic
adjustment control.
*
Production Control System
F
ully implement the ISO9001:2008 quality management system.
*
100% Quality Control Test
Each Machine with 100% QC Test , Life Test and Welding Function Test,Drop test and Dust test !
*
Factory Management Control
Over 10 years factory control system focus on the welding field.
Contact us
💬Please be patient when contacting us, all messages will be replied within 24 hours.
💬Please let us know immediately if a package is damaged upon arrival.
💬Feel free to contact us if you’d like to combine shipping on your purchases.
💬We appreciate your positive five stars feedback and we will send buyers positive feedback after a shipment has been processed.
💬Customer satisfaction is significant to us. If you are dissatisfied with a transaction for any reason. Before taking any action, please contact us through eBay and we will do everything we can to help you.
Modified Item
No
Custom Bundle
No
Welding Process
MIG/Flux Core/Stick/Lift TIG/Solid wire
MPN
Does Not Apply
Brand
REBOOT
Country/Region of Manufacture
China
Feed
Semi-Automatic Feed
Item Type
Flux Core Welder
Parameter
MIG/MMA/lift TIG MIG1300 4 in 1 welder
Model
MIG1300
Input power voltage
AC220±15%V
Rated input power capacity
4.5KVA
Input current
16A
Features
Gasless, Line Voltage Compensation, Thermal Overload Protection, With Gas
Rated output current
130A
Welded Material
Mild Steel
Rated output voltage
25V
Duty cycle
60%
Output current range
30-130A
Output voltage range
15-19V
Insulation class
F
Protection class
IP21S
Weight
9.2kg
Efficiency
85%
Wire feeder
Inside
Post flow time
8S
Power factor
0.93cosφ
Welding thickness
≥0.8mm (.030")
Diameter of wire
0.8/1.0mm (.030"-)
Non-Domestic Product
Yes
Applicable Regions
Suit For US , CA and Other Countries
Voltage
220 V
Color
Green
size
415×273×310mm
On Aug-05-21 at 07:57:11 PDT, seller added the following information: