Siser StripFlock Pro Iron On Heat Transfer Vinyl 12" *FREE SHIPPING*

Description

StripFlock® Pro Heat Transfer Vinyl
A great alternative to embroidery, StripFlock Pro heat transfer vinyl gives logos a raised, textured, suede-like feel. The deep, opaque colors make StripFlockPro excellent for retro designs or anytime you want a rich look. StripFlock Pro looks excellent on caps, bags, and garments that need textured visual interest. Use Stripflock Pro (standard colors) as a base layer and cover with other materials or more StripFlock! The ability to layer this material allows you to say “yes” to multi-color designs.
StripFlock Pro is
CPSIA Certified
so you can decorate kids’ items with confidence.
Specifications:
• PVC Composition • Pressure sensitive backing • Suede-like finish • 500 Microns/19.6 Mils • 45°/60° blade
• Can be layered for standard colors  • Layer not recommended for fluorescent colors
CUTTER SETTINGS
Cricut:
Blade: Standard
Setting: Iron-On +
Silhouette Cameo:
Blade: Standard, 4
Material: Heat Transfer, Flocked
Speed: 5
Force: 6
Scan N Cut:
Blade: Standard, 4
Cut Speed: 1
Cut Pressure: 2
Roland GS/GX-24:
Blade: 45°
Gram Force: 80-120
Offset: 250
Speed: 30 cm/s
Graphtec:
Blade: 45°
Gram Force: 10
Tool: CB09U+0
Speed: 30 cm/s
Titan 2 & 3
Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies
Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.
APPLICATION INSTRUCTIONS
Application Instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 10 seconds
• Peel carrier hot or cold (standard colors)
• Peel carrier warm (fluorescent colors)
Application Instructions (heat press)
• Cut in Reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 311°F/155°C
• Use light/medium pressure for 15 seconds
• Peel carrier hot or cold (standard colors)
• Peel carrier warm (fluorescent colors)
RECOMMENDED ACCESSORIES & CARE
StripFlock Applies to:
100% cotton
Poly/cotton blends
100% polyester
Leather
Recommended Accessories:
Siser Weeder
Laundering:
Wait 24 hours before 1st wash
Machine wash or cold / mild detergent
Dry on normal dryer setting
Do not dry clean