Siser Holographic HTV 12 Inch by 19.66 Inch *Buy 2 or More and Save*

Description

Holographic Heat Transfer Vinyl
A New Dimension in Heat Transfer Vinyl
Holographic contains color changing chips that create the effect of depth and dimension. Available in many special effect colors and finishes, Holographic will take your designs to a new level. Love the look of rhinestones but don’t want to go through all the hassle? Holographic can be cut to look exactly like rhinestones, without having to go through all the extra work associated with applying
rhinestone designs
. The Holographic line also features our Pearl material. Pearl is unlike any other material, giving your designs an opalescent finish. Holographic can be cut with laser systems.
Holographic is
CPSIA Certified
so it’s perfect for decorating items intended for children.
Specifications:
Polyester Composition
• Pressure sensitive backing • Gloss finish • 110 Microns/4.3 Mils
• 45°/60° blade • Layering not recommended
CUTTER SETTINGS
Cricut:
Blade: Standard
Setting: Light Cardstock
Silhouette Cameo:
Blade: Standard, 3
Material: Heat Transfer, Smooth
Speed: 8
Force: 14
Scan N Cut:
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 3
Roland GS/GX-24:
Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s
Graphtec:
Blade: 45°
Gram Force: 17-18
Tool: CB09U+0
Speed: 30 cm/s
MH, SC2, LP3, Titan 1:
Blade: 45°/60°
Gram Force: 85-90
Speed: 300 mm/s
*Blade Advancing Varies
Titan 2 & 3
Blade: 45°/60°
Gram Force: 75-80
Speed: 300mm/s
*Blade Advancing Varies
Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.
APPLICATION INSTRUCTIONS
Application Instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier cold
Application Instructions (heat press)
• Cut in Reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use medium pressure for 15-20 seconds
• Peel carrier cold
RECOMMENDED ACCESSORIES & CARE
Holographic Applies to:
100% cotton
Poly/cotton blends
100% polyester
Leather
Recommended Accessories:
Siser Weeder
Laundering:
Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean