-40%
Siser Brick 600 Iron On Heat Transfer Vinyl (20
Siser Brick 600 Iron On Heat Transfer Vinyl (20
Siser Brick 600 Iron On Heat Transfer Vinyl (20
Siser Brick 600 Iron On Heat Transfer Vinyl (20
Siser Brick 600 Iron On Heat Transfer Vinyl (20
Siser Brick 600 Iron On Heat Transfer Vinyl (20
Siser Brick 600 Iron On Heat Transfer Vinyl (20

Siser Brick 600 Iron On Heat Transfer Vinyl (20" Width) **FREE SHIPPING**

$ 5.25

Availability: 8150 in stock
  • Model: Brick 600
  • Restocking Fee: No
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Country/Region of Manufacture: Italy
  • Type: Heat Transfer Vinyl
  • Brand: Siser
  • Return shipping will be paid by: Buyer
  • Format: Roll
  • MPN: Does Not Apply
  • Condition: New
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted

    Description

    Brick® 600 Heat Transfer Vinyl
    Our Thickest Heat Transfer Vinyl – Now Easier to Cut and Apply
    Thin or thick, materials of all sizes have a place in garment decorating! Siser Brick® 600 is a 600 micron thick, flexible heat transfer vinyl that’s designed for smaller logos and designs to add extra dimension to your garments.
    Brick
    600’s matte finish looks great on caps, bags, and is ideal for left chest logos. Next time you feel your design is just too flat, consider giving it some dimension with
    Brick
    600 by Siser!
    Brick
    600 can be cut with laser systems.
    Brick
    is
    CPSIA Certified
    so it’s perfect for decorating children’s clothing and accessories.
    Specifications:
    PU Composition
    • Pressure sensitive backing • Matte finish • 600 Microns/23.6 Mils
    • 45°/60° blade
    CUTTER SETTINGS
    Cricut:
    Blade: Standard
    Cardstock Light+
    Silhouette Cameo:
    Blade: Standard, 10
    Material: Heat Transfer, Flocked
    Speed: 4
    Force: 33
    Scan N Cut:
    Blade: Standard, 10
    Cut Speed: 1
    Cut Pressure: 2
    Roland GS/GX-24:
    Blade: 60°
    *
    Gram Force: 150-190
    Offset: .250
    Speed: 30 cm/s
    Graphtec:
    Blade: 60°
    *
    Gram Force: 11-12
    Tool: CB09U+0
    Speed: 25 cm/s
    MH, SC2. LP3, & Titan 1:
    Blade: 45°/60°
    Gram Force: 120-130
    Speed: 300mm/s
    *Blade Advancing Varies
    Titan Series
    Blade: 45°/60°
    Gram Force: 100-110
    Speed: 300mm/s
    *Blade Advancing Varies
    Settings may vary based on blade condition and age of machine.
    Always perform a test cut prior to cutting designs.* For Roland & Graphtec cutters, due to the material thickness, extend the blade out so that a significant
    amount of blade is exposed.
    APPLICATION INSTRUCTIONS
    Application Instructions (home iron)
    • Set iron dial between Cotton and Linen
    • Cover design with Kraft paper or non-stick cover sheet
    • Place on flat, hard surface (ironing board not recommended)
    • Press iron with medium/firm pressure (do not slide iron)
    • Press each section of design for 10-15 seconds
    • If areas of design lift after application, replace cover sheet
    and re-press for 10 seconds
    • Peel carrier cold
    Application Instructions (heat press)
    • Cut in Reverse
    • Weed excess material
    • Preheat garment for 2-3 seconds
    • Apply design at 311°F/155°C
    • Use medium/firm pressure for 20 seconds
    • Peel carrier cold
    RECOMMENDED ACCESSORIES & CARE
    Brick 600 Applies to:
    100% cotton
    Poly/cotton blends
    100% polyester
    Recommended Accessories:
    Siser Weeder
    Laundering:
    Wait 24 hours before 1st wash
    Machine wash cold / mild detergent
    Dry on low dryer setting
    Do not dry clean