Miller Millermatic 211 MIG Welder with Advanced Auto-Set (907614)

Description

Miller Millermatic 211 MIG Welder w/ Advanced Auto Set - 907614
WHAT'S INCLUDED
Millermatic 211
Hook-and-loop cord wraps
6.5 ft (2 m) power cord and MVPâ„¢ adapter plugs for 120V and 240V
10 ft (3 m) MDXâ„¢-100 MIG gun
10 ft (3 m) work cable and clamp
Argon and AR/CO2 mix regulator/flow gauge with hose
Spool of Hobart® .030 in (0.8 mm) solid wire
Two contact tips for .030 in (0.8 mm) wire
Quick Selectâ„¢ drive roll for .024 in (0.6 mm) or .030/.035 in (0.8/0.9 mm) solid wire, and .030/.035 (0.8/0.9 mm) flux cored wire
Material thickness gauge #229895
Advanced Auto-Setâ„¢
Advanced Auto-Setâ„¢ now includes five different wire/gas combinations and .024, .030 and .035-inch wires. The easiest welder to use just became more versatile.
Inverter Technology
Inverter technology combines best-in-class arc characteristics with the portability of a 38-pound machine. The arc is extremely forgiving to variations in arc length and travel speeds.
Quick Selectâ„¢ Drive Roll
Quick Select™ drive roll makes setup quicker by offering three grooves—two for different size solid wire and a third for flux-cored wire.
Auto Spool Gun Detectâ„¢
Auto Spool Gun Detectâ„¢ automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.
Fan-On-Demandâ„¢
Fan-On-Demandâ„¢ power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled though the machine.
Multi-voltage plug (MVPâ„¢)
Multi-voltage plug (MVP) allows connection to common 120 or 240 V power receptacles without the use of any tools— simply choose the plug that fits the receptacle and connect to the power cord.
New Drive System
Angled cast-aluminum drive system with calibrated tension knob creates consistent feeding and easy setup for up to 15-foot MIG guns.
Smooth-Startâ„¢
Smooth-Start™ provides a smooth, spatter-free start. It’s the best-starting machine in the small MIG machine category.
Generator Compatible
The Millermatic 211 will be able to operate and provide full output when powered by generators with 7000 Watt (7K) output or higher, such as a Miller Bobcat or Trailblazer series generator. Limited output will occur when used with smaller generators.
PROCESSES
MIG (GMAW)
Flux Cored (FCAW)
GENERAL SPECIFICATIONS
Title
Millermatic® 211 MIG Welder
Industries Interests
DIY / Home Hobbyist
Farm and Ranch
Metal Art / Sculptures
Racing / Customizing / Restoring
Education / Training
Amperage
30 A - 230 A
Material Thickness
Aluminum 18 ga. (1.2 mm) - 3/8 in. (9.5 mm)
Mild Steel 24 ga. (0.5 mm) - 3/8 in. (9.5 mm)
Weldable Metals
Aluminum
Stainless Steel
Steel
Input Voltage
110/115/120 V
220/230/240 V
Input Phase
1-Phase
Input Hz
50/60 Hz
Current Type
DC
Rated Output
150 A at 21.5 VDC, 40% duty cycle (240V),115 A at 19.8 VDC, 20% duty cycle (120V)
Max Open Circuit Voltage
54 VDC
Wire Feed Speed
1.5 m/min - 15.2 m/min
60 IPM - 600 IPM
Wire Diameter
Stainless 0.024 in. - 0.035 in.
Stainless 0.6 mm. - 0.9 mm.
Solid Steel 0.6 mm. - 0.9 mm.
Solid Steel 0.024 in. - 0.035 in.
Flux Cored 0.03 in. - 0.045 in.
Flux Cored 0.8 mm. - 1.2 mm.
Spool Size
8 in (203 mm)
Portability
Handle(s)
Running Gear / Cart (Optional)
Weld Output
CV
Net Width
11.25 in
Net Height
12.5 in
Net Length
20.5 in
Net Weight
38 lbs