Miller 951766 Millermatic 255 MIG/Pulsed MIG Welder w/ EZ-Latch™ Running Gear

Description

Miller 951766 Millermatic 255 MIG/Pulsed MIG Welder w/ EZ-Latch™ Running Gear
Easy to use machine to increase efficiency and productivity for the light manufacturing and fabrication users. Color screen
featuring Auto-Set™ Elite and Pulsed MIG. This all-in-one welder connects to 208 or 240 volt input power. Welds up to 1/2” aluminum.
WHAT'S INCLUDED
Millermatic 255 with 10 ft. (3 m) power cord
15 ft. (4.5 m) 250-amp MDX™-250 MIG gun w/ Bernard® AccuLock™ S consumables for .035/.045 in. (0.9/1.2 mm) wire
10 ft. (3 m) work cable and clamp and 50mm Dinse-style connector
Flow gauge regulator and gas hose for argon or AR/CO2 mix
Extra contact tips
.035/.045 in. (0.9/1.2 mm) reversible drive rolls
Chain to secure gas cylinder
Material Thickness Gauge
EZ-Latch™ Running Gear
Easy-to-understand interface
7-inch color LCD display ensures proper machine setup and parameter selection, reducing setup time and increasing weld time.
Pulsed MIG welding delivers higher quality
Lower heat input for less distortion on thin materials, less spatter minimizes post weld grinding and rework allowing more welding time. Perform welding applications that couldn’t be done in the past.
Auto-Set™ Elite
offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels.
Program mode allows easy save and recall of favorite weld settings
Deliver more productivity, consistent quality by welders of all skill levels by using prequalified weld settings. Minimize supervisor need to intervene.
Auto-Line™ Technology
For portability and reliability, this inverter power supply allows for any single-phase input voltage hookup (208–240 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
Versatility
Capabilities include MIG, pulsed MIG and flux-cored welding.
MDX-250 MIG Gun w/ AccuLock™ S consumables
AccuLock liner loads from the front and locks at the front and back to insure proper alignment for flawless wire feed path. New rubber overmold and ball -and-socket handle design improves grip and reduces welder fatigue. New Industrial Bernard AccuLock™ S contact tips provide superior Spray and Pulsed MIG arc performance
Portability - Machine only weighs 84 lb
Weight is reduced by more than 50 percent compared to the Millermatic 252.
EZ-Latch™ running gear
Operators no longer need to use lift truck to load machine and running gear into the truck. Latches secure machine to running gear. Simply loosen the latch retaining knob and rotate latches to disengage machine from running gear for easy portability.
Generator Compatible
The Millermatic 255 will be able to operate and provide full output when powered by generators with 12000 Watt (12K) output or higher. Limited output will occur when used with smaller generators.
PROCESSES
Aluminum Welding
Flux Cored (FCAW)
MIG (GMAW)
GENERAL SPECIFICATIONS
Title
Millermatic® 255 MIG/Pulsed MIG Welder w/ EZ-Latch™ Running Gear- 208/240V
Industries Interests
Auto Repair
Commercial Truck and Trailer
Construction
Education / Training
Fabrication
Farm and Ranch
Maintenance and Repair - In Plant
Manufacturing
Mechanical Contracting
Metal Art / Sculptures
Racing / Customizing / Restoring
Material Thickness
Mild Steel 24 ga. (.51 mm) - 1/2 (13mm)
Aluminum 18 ga. (1.02 mm) - 1/2 (13mm)
Weldable Metals
Aluminum
Stainless Steel
Steel
Input Voltage
208 V
220/230/240 V
Input Phase
1-Phase
Input Hz
60 Hz
Input Amperage
20-350
Current Type
DC
Rated Output
230 A at 25.5 V, 60% duty cycle
Max Open Circuit Voltage
87 VDC
Wire Feed Speed
IPM Range 50 IPM - 800 IPM
Wire Diameter
Solid Steel 0.023 in - 0.045 in
Stainless Steel 0.023 in
Flux Cored 0.03 in - 0.045 in
Aluminum 0.035 in - 0.047 in
Spool Size
12 in (305 mm)
Portability
Handle(s)
Running Gear / Cart (Standard)
Weld Output
CV
Warranty
Miller's True Blue Warranty
Please msg for a quote on additional shipping charges to US territories.