MIG Welder Gas/Gasless IGBT Inverter ARC Stick TIG 5 IN 1 MIG130 Welding Machine

Description

130A MIG Welder Gas/Gasless IGBT Inverter MIG Stick TIG 5 IN 1 Welding Machine
pls contact me for the
Operation Manual if you need !!!
Buy directly from the manufacturer and benefit from our exclusive advantages!
It is easy to set the welding parameters,the RBM1300 welder machine supports 2.2lb flux cored wire most perfectly to do the carbon steel welding without gas.mig/mma ,gas/gasless all are available ,mma welding(3.2mm rod) 7018 1/8″ very well, also 6013 and 7018 3/32″
Using gas works with 2lb solid welding wires .030"-.035"（0.8/1.0 mm ）to weld over .030"(0.8mm) thickness workpiece. also supports gasless welding,portable design 18bls.【30A breaker suggested】
Lift tig mode is optional(need to buy extra tig torch,not included in this package).please find the tig torch as below
Great gift for DIY users,maintenance and repair and metal fabrication. energy conservation and environment protection to compare with transformer welders. home use ,switching frequency is beyond audio range, which almost eliminates noise pollution
Buy with confidence as Reboot offer 30-day 100% satisfaction or money back guarantee and 1-year limited warranty,there is a warranty card comes together in the package,please email us through that to get the consumables.click on the add to cart button now!
TYPE
RBM1300
Input power voltage (V)
1phase AC220V，50/60Hz
Rated input current (A)
19.2
Rated power capacity (KVA)
2.5
Current adjustment range (A)
MIG:30-120 MMA:30-110
Welding thickness (mm)
>1.0
Voltage adjustment range (V)
15-21
No-load voltage (V)
55±5
Electrode diameter (mm)
0.8/1.0
Rated duty cycle
60%
Efficiency (%)
85%
Power factor
0.7
Protection class
IP21S
Insulation class
F
Size (mm)
420*280*310
Weight (Kg)
8.8
Why is my MIG-130 Welder not welding correctly?
1. Wire feed tension: Check the tension on the spooler. Is it set too tight or is the wire feed tension not set correctly?
2. Wire choice: Are you using .035” wire? We recommend .025-0.30" for best performance.
3. Stick out: Is your stick out too long? Your stick out should be no more than ½”.
4. Pull the trigger: To begin welding, pull the trigger on the MIG gun.
5. Proper grounding: The ground should not be attached to painted or coated metal.
Package Include:
1pcs Power source Mig welder MIG130
1pcs  cable +Earth clamp
1pcs  MB15 Build in Mig welding torch
1pcs Flux cored wire 1kg without gas weld
1pcs 3m Welding gas hose
Use a metal brush or grinder and clean down to bare metal before striking an arc.
A fillet weld, shown here, is one of the most common types of welds. In the flat position, keep the gun angled at 45 degrees from each piece.
Whether you weld vertical up or down will depend on the application and the thickness of the material you are welding.
You'll want to direct more heat into the bottom piece of metal when welding a lap joint. A 60 to 70 degree angle is usually best.
1.Current display meter
The digital Ammeter is used to display the actual output current of the power source.
It is also used to display Parameters in Programming Mode.
Depending on the Programming Parameter selected, the status indictor adjacent to the Ammeter will illuminate to show the units of the programming parameter.
When welding, the Ammeter will display actual welding current.
2
.
Voltage display meter
3
.
MIG/MMA/LIFT TIG Function selection
4
.Choose the wire diameter and the choice of gas welding and gasless welding
5.
Small range voltage adjustment and inductance adjustment
It is recommended that the voltage does not need to be adjusted. The machine is a unified machine. The voltage, current and wire feeding speed are automatically matched. Only when the deviation is too large, it can be adjusted appropriately. Inductance adjustment: If the splash is too large or the welding pool is not deep enough, it can be adjusted to a larger value, otherwise it can be smaller.
6
. Adjust the value knob
Clockwise rotate to enlarge the current, and anti-clockwise rotate to reduce the current.
7
.MIG Welding torch connector
8.
Polarity selection plug
In MMA and LIFT TIG state, this plug does not need to be connected; in MIG gas welding state, this plug is connected to positive
terminal 8; in MIG airless welding state, this plug is connected to negative terminal 9.
9.
Negative Terminal
Negative Terminal. Welding current flows from the power source via heavy duty bayonet type terminals. It is essential, however, that the male plug is inserted and turned securely to achieve a sound electrical connection.
10
.Positive Terminal
Positive Terminal. Welding current flows from the power source via heavy duty bayonet type terminals. It is essential, however, that the male plug is inserted and turned securely to achieve a sound electrical connection.
NOTE: TIG welding gun is not included in the package, you need to purchase it separately.
LIFT TIG mode:
REBOOT RBM1300 for thin plates with higher welding process requirements or welding with higher process requirements, especially for stainless steel welding, you can use the LIFT TIG mode, which requires the use of pure argon.
1、 Select “Lift TIG ” process.
2.how to connect ,as the right picture shows !
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
1. We can ONLY accept PayPal payments.
All major credit cards are accepted through the secure payment processor PayPal.
2. Payment must be received 7 days after the auction ends.
Unpaid disputes are filed on eBay for non-payable buyers.
3. Import duties, taxes and charges are not included in the item price or shipping cost.
These charges are the buyer's responsibility.
4. Remote areas need to pay additional shipping.
Delivery details
1. Shipping cost: Click the shipping and payment tab on the product detail page to see the delivery details.
You can calculate the shipping cost by entering the required information.
2. Transit time: The transit time varies depending on the shipping method.
3. Item Processing Time: The processing time for a specific order depends on the product type and stock status.
Mostly, processing time can be 2 working days.
Terms of sales
1.60 days  free store warranty:
All our product offer 60 days free warranty time,during this period,if our item got quality problem.We will exchange or replace item for customers without any fee.
2. 3 years store warranty:
All our product got 1 year store warranty,after 60 days free store warranty.During this time,if our item got quality problem,we can offer exchange or repair.But buyer need to pay the ship back fee when we pay the re-ship fee.
3. 1 week Return:
All our item offer 7 days return peroid,defective or non-defective. Return must include all original package and accesorries, item must in good condition.
Defective item: customers first pay the shipping fee and ship back the item, we check and confirm, then we will offer full refund and the ship back fee.
Non-defective item: 7 days Unconditional return, buyer need to pay the ship back fee, and we will offer refund your payment, but not include shipping fee.
4. Please do contact us first by ebay message before any return or case.
About us
*
Full Digital Control System
S
mart Design with full digital control ,Constant voltage and synergic
adjustment control.
*
Production Control System
F
ully implement the ISO9001:2008 quality management system.
*
100% Quality Control Test
Each Machine with 100% QC Test , Life Test and Welding Function Test.
*
Factory Management Control
Over 10 years factory control system focus on the welding field.
Contact us
1.Please be patient when contacting us, all messages will be replied within 24 hours.
2.Please let us know immediately if a package is damaged upon arrival.
3.Feel free to contact us if you’d like to combine shipping on your purchases.
4.We appreciate your positive five stars feedback and we will send buyers positive feedback after a shipment has been processed.
5.Customer satisfaction is significant to us. If you are dissatisfied with a transaction for any reason. Before taking any action, please contact us through eBay and we will do everything we can to help you.
On May-11-21 at 20:58:09 PDT, seller added the following information: