MIG Welder GAS GASLESS MMA STICK LIFT TIG 4 IN 1 WELDING MACHINE WITH FREE TOOL

Description

Product parameter
—
Input power voltage (V)
1phase AC220V，50/60Hz
—
Rated input current (A)
19.2
—
Rated power capacity (KVA)
2.5
—
Current adjustment range (A)
MIG:30-120  MMA:30-110
—
Welding thickness (mm)
>1.0
—
Voltage adjustment range (V)
15-21
—
No-load voltage (V)
55±5
—
Electrode diameter (mm)
0.8/1.0
—
Rated duty cycle
60%
—
Efficiency (%)
85%
—
Power factor
0.7
—
Protection class
IP21S
—
Insulation class
F
—
Size (mm)
420*280*310
—
Weight (Kg)
8.8
Product description
1.MMA mode
If you want to repair some broken fences or fix brackets, you like to use traditional welding rods for operation, you can use REBOOT RBM1300 MMA mode for welding.
a、Select “MMA” process.
b、Connect welding holder and ground clamp.
c、To adjust the current, only the current can be adjusted.
Note:
1) The welding rod specification supported by reboot RBM1300 is below 3.2(1/8in), usually 2.5(3/32in) and 3.2(1/8in).
European style generally uses E6013, American style generally uses E7018, and stainless steel generally uses ER308.
2) It supports welding of 1-5mm(1/64-7/32in) carbon steel and 1-3.2mm(1/64-1/8in) stainless steel. Aluminum can not be welded. For carbon steel, please use carbon steel electrode. For stainless steel, please use stainless steel electrode.
3) Connect the ground clamp to clean bare metal. No rust, paint or other coatings, and ensure good electrical conductivity.
4) The ideal distance between the welding rod and the welding object is 1-2mm(1/64-5/64in), to ensure that the welding rod and the workpiece are in continuous and stable contact. The welding rod should not be too high or pressed too low to avoid arc breaking and adhesion.
5) It is normal for novices to have adhesion during the welding process, and you can try to friction arc to avoid adhesion.
6) Suitable for ordinary welding rods, such as 7018, 6013, etc., but not suitable for special welding rods, such as 7010, 7011.
2、MIG mode
REBOOT RBM1300 provides two welding modes: gas shielded welding and self-shielded welding with fluxed wire. If you are working at home or in a studio, in order to ensure a better welding effect, it is recommended that you use the gas welding mode; if you need to go out to work, carry gas cylinders and other inconvenient situations, you can use the Self-protected welding method.
-—Gas shielded welding mode
a、 Select “MIG ” process.
b、 Set polarity for MIG Solid wire（gas）
Reboot RBM1300 Excellent support for welding wires of 0.8mm and 1.0mm in diameter,
and automatically and intelligently match the best welding parameters according to different specifications of welding wires to achieve the best results.
c、Connect MIG gun and ground clamp.
d、Install wire spool
0.030”(0.8mm)/0.040”(1.0mm)diameter
4”(100mm 1kg)wire spool
—Self-protection mode of flux-cored welding wire.
3.lift TIG mode
NO tig torch include ,Need to be purchased separately
Package list
1pcs Power source Mig welder MIG130
1pcs  2m cable +Earth clamp
1pcs  2m cable+Welding holder
1pcs  2.5m MB15 Build in Mig welding torch
1pcs Flux cored wire 1kg without gas weld
1pcs 3m Welding gas hose
1 set tool box !!! (free gift )
On Jul-08-21 at 02:15:24 PDT, seller added the following information: