MIG Welder Flux Core 220V 130A Gas Gasless MIG/Stick/Lift MIG Welding Machine

Description

1. Go with 1kg flux cored wire most perfectly to do the Steel welding without gas. 2. Using gas with 1kg solid welding wires .030"-.035"（0.8/1.0 mm ）to weld over .030"(0.8mm) Thickness workpiece. 3. MIG/MMA ,Gas/Gasless All are available ,MMA Welding(3.2mm Rod) 7018 1/8″ very well, also 6013 and 7018 3/32″ 4. No gas required, Portable design 18bls and easy to use with high effect to instead of stick welder. 5. Great for DIY Users, Maintenance and Repair and Metal Fabrication. Energy conservation and environment Protection to compare with Transformer welders. 6. Home use ,switching frequency is beyond audio range, which almost eliminates noise pollution 7. Buy with Confidence as We Offer 30-Day 100% Satisfaction or Money Back Guarantee and 1 Year Limited Warranty
Home
Payment
Shipping
Return Policy
About Us
Contact Us
Feedback
NEW MIG Welder Flux Core AC220±15%V 1130A Gas/Gasless MIG/Stick/Lift MIG Welding
upgrade
Service
,3 years warranty/
100% Brand New/ REBOOT High quality/USA Fast shipping
Product description
Look at the panel,it is easy to set the parameters. the mig130 supports with 1kg flux cored wire most perfectly to do the carbon steel welding without gas.mig/mma ,gas/gasless all are available ,mma welding(3.2mm rod) 7018 1/8″ very well, also 6013 and 7018 3/32″
Using gas with 1kg solid welding wires .030"-.035"（0.8/1.0 mm ）to weld over .030"(0.8mm) thickness workpiece. also supports gasless welding,portable design 18bls.【30A breaker suggested】
Lift tig mode is optional(need to buy extra tig torch,not included in this package).please find the tig torch as below
Great gift for DIY users,maintenance and repair and metal fabrication. energy conservation and environment protection to compare with transformer welders. home use ,switching frequency is beyond audio range, which almost eliminates noise pollution
Buy with confidence as Reboot offer 30-day 100% satisfaction or money back guarantee and 1-year limited warranty,there is a warranty card comes together in the package,please email us through that to get the consumables.
Parameter:
MIG/LIFT TIG/MMA STICK 4 in 1 WELDING MACHINE
Input power voltage: AC220±15% V
Rated input power capacity: 4.5KVA
Input current :16 A
Rated output current :130 A
Rated output voltage :25 V
Duty-cycle: 70%
Output current range :30-130 A
Output voltage range :15-19V
Insulation class : F
Protection class : IP21S
Dimensions: 415×273×310MM
Weight : 9.2KG
Efficient: 85 %
Wire feeder : Inside
Power factor cosφ 0.93
Welding thickness: ≥0.8mm
Diameter of wire: 0.8/1.0mm
Troubleshooting
1. Wire feed tension: Check the tension on the spooler. Is it set too tight or is the wire feed tension not set correctly?
2. Wire choice: Are you using .035” wire? We recommend .030-0.35" for best performance.
3. Stick out: Is your stick out too long? Your stick out should be no more than ½”.
4. Pull the trigger: To begin welding, pull the trigger on the MIG gun.
5. Proper grounding: The ground should not be attached to painted or coated metal.
Include:(accroding to your buying choice !)
1pcs Power source Mig welder MIG130
1pcs cable +Earth clamp
1pcs MB15 Build in Mig welding torch
1pcs Flux cored wire 1kg without gas weld
1pcs 3m Welding gas hose
1pcs operation manual (
If you need, you can also contact us for the electronic manual)
THIS ITEM DO NOT INCLUDE TIG TORCH !!!
The machine is guaranteed for 3 years,Within three months of receiving ,we provide free repairs ,seller affrod shipping fee .if beyond three months ,repairs is also free, but buyer need to afford shipping fee for return .
pls no need worry to buy ! we provide all service of buying.
On Apr-28-21 at 20:14:09 PDT, seller added the following information: