-40%
MIG Welder 135A Flux MIG/Lift TIG/Stick 3in1 IGBT Inverter Weding Machine 110V
$ 89.75
- Description
- Size Guide
Description
Product Specifications:Input Voltage: 110(120)V
Input Current: 19.3A
Duty Cycle: 60%(135A) 100%(104A)
Insulation Class: F
Output Voltage:20.7V
Output Current:135A
Protection Class: IP21S
Application: Flux MIG/Stick/Lift TIG(need buy extra tig lift torch)
TOOLIOM 135A MIG WELDER MACHINE
Features&Advantages
Powered by standard 110(120)V household current.
Up to 135A output current that can weld mild steel up to 1/8 inch (3.0mm) plate.
Weld voltage micro adjust from -5 to +5 (Low to high,-1.5V to +1.5V).
Equipped with smart digtal display,read the output welding current.
2T Operation,suitable for spot welding and simple work.
Come with a safety feature that the welding machine is automatically protect when it it too hot or the volt and current exceed their range.
Lift tig is optional(need buy extra tig lift torch,not included inside product)
3 Functions in 1
Multi-functions in one machine,suitable for Stick,Lift TIG,Flux MIG,best choice for steel works.
MIG Gun
Use standard Lincoln front consumables 21 series nozzle, 11 series tip and 35-40-15 liner.
Ready to feed .030" and .035" diameter welding wire.
Inner Wire Feeder
Apply to D100(4" diameter) rolls of MIG wire.
Weld up to .030"(0.8mm) and .035" (0.9mm)with flux core wire.
Max. Welding Thickness
Can weld up 1/8 inch (3mm) plate using 0.30"(0.8mm)/.035"(0.9mm) flux core wire
Can Handle E7018 basic electrode.
Size
This welding machine equipped with a easy carrying handle,compact design, easy for translation and storage. Very convenient, can be used anywhere you need.
Package Included
TL-135M Welder
MIG Gun
Electrode holder (10ft.)
Ground clamp (10ft.)
Wire Brush
2*Contact Tips
Flux MIG
Locate the Ground Clamp with Cable and connect the plug on the cable end to the Positive Connector (+) on the Welder.
Lift TIG
Locate the Ground Clamp with Cable and connect the plug on the cable end to the Positive Connector (+) on the Welder.
Lift tig is optional(need buy extra tig lift torch,not included inside product)
MMA
Locate the Ground Clamp with Cable and connect the plug on the cable end to the Negative Connector (–) on the Welder.