Idobao ID80 V2 w/ TKC Kiwi Switches and EnjoyPBT Teal Dolch Keycaps

Description

Idobao ID80 V2 w/ TKC Kiwi Switches and EnjoyPBT Teal Dolch Keycaps.  I used for for about 2 months before upgrading to the ID80 Crystal
Keyboard:  The ID80 V2 is a 75% hotswap integrated plate keyboard.  I would describe the feel of the board as not having an flex to it (I prefer this, but it's all preference)  It is made almost fully of aluminum with an aluminum plate and body.  It also has a brass weight in the back and an acrylic bottom to diffuse the RGB LEDs in the bottom.  The top PCB LEDs only shine white.  I replaced the top stabilizers with Durock V2 screw-in stabilizers that were lubed and band-aid modded.  This keyboard is VIA/QMK compatible.  The connector on the back of the board is USB-C.  The keyboard was used for only about 2 months.
Switches: TKC C3 Kiwi Switches are tactile switches with a 67g bottom out.  These switches are stock without any modification, although they are factory lubed and the housing fits very snuggly, so I don't think films will do much for these switches.  In addition to the switches in the board, I'll be including about 20 extra switches that I bought as a set.  I would describe the feel of these switches as having a fairly noticeable tactile bump at the top of the key press and then a smooth feel after the tactile bump.  The switches are in open box condition with only being used to test all the keys after assembly.
Keycaps: EnjoyPBT Teal Dolch keycaps are a double-shot ABS plastic set of keycaps.  In addition to the keycaps on the board, I'll be including the rest of the keycap set which should be adequate to fit any keyboard.  The profile of these is cherry, which is noticeably shorter than OEM height.  I would describe the feel of these keycaps as grippy, but not sticky or rough.  The  keycaps are in open box condition with only being used when assembling this board to test all the keys.
This board comes fully assembled and is great for gaming or for long typing sessions.  Also no need to wait for long shipping times from outside the US.
TL;DR:
FULLY-ASSEMBLED KEYBOARD:
ID80 V2 Hotswap Keyboard
Durock V2 Screw-In Stabilizers
TKC Kiwi Tactile Switches
EnjoyPBT Teal Dolch Keycaps