HT GLITTER INKJET TRANSFER PAPER FOR LIGHT AND WHITE FABRICS (8.5 X 11)

Description

HT GLITTER INKJET TRANSFER PAPER FOR
LIGHT AND WHITE COLORED FABRICS
ITEMS YOU WILL NEED
1.Prewashed Cotton or Cotton/Polyester blend fabric
2.Heat Press or Iron (do not use steam)
3.Pillowcase
4.Parchment paper
5.Hard smooth surface: Do NOT use an ironing board
6.Scissors
7.Pencil
step 1
step 1
step 2
STEP ONE-PRINTING YOUR IMAGE
1.Bring paper to room temperature before printing.
2.Load transfer sheets into your printer so that
the image is printed on the unlimited (non-glossy) side.
3.Using your computer, select or design images to be
transferred.
Mirror or flip the image before printing.
4.Print image/design on paper using the following
recommended print settings.
5.Use scissors to cut around the transfer artwork
to remove excess.
PRINTER
MEDIA
MODE
HP
HP Iron on Transfer
Normal
Epson
Plain Paper
Photo
Canon
(Standard) Photo Paper plus Glossy
Standard
STEP TWO-TRANSFERRING THE IMAGE HEAT PROCESS
1.Preheat press to 350 F -375 F.
2.Press fabric for 3-5 seconds to release moisture and
remove wrinkles.
3.Place transfer face down (lined side up) on the fabric.
4.Place parchment paper over transfer.
5.Set to medium pressure for best results
6.Press for 20-25 seconds.
7.Peel COLD for best results: wait for transfer to cool for
at least two minutes and remove the backing paper using
a smooth even motion.
HAND IRON
1.Preheat your iron to the “Linen” setting. Lay a pillowcase on
the ironing surface.
2.Pre-iron the fabric to release moisture and remove wrinkles.
3.Place printed transfer face down (lined side up) on the fabric.
4.Using FIRM, STEADY pressure, glide the iron in a circular
motion over the entire transfer for 2 minutes.
It is important to cover the transfer completely.
5.After ironing each section of the transfer, glide the iron
once more over the entire transfer to heat evenly
6.Peel COLD for best results: wait for transfer to cool for
at least two minutes and remove the backing paper using a
smooth even motion.
WASHING INSTRUCTIONS
1.Tum garment inside out.
2.Wash in COLD water.
3.Use a mild detergent for best results.
4.Do not use bleach or bleach alternative detergents.
5.Remove the garment promptly from the washer: the color may
bleed if left in the washer.
6.Dry on LOW temperature.
NOTE
When transferring several images to the same piece of fabric,
be sure to cover all applications to ensure none of the transfers
are damaged from direct exposure to heat.Store unused transfer
papers in a resealable poly bag in a flat, cool, dry area.