GLOSSY 12'' x 12'' Vinyl Sheet Permanent Oracal 641 for Cricut Silhouette

Description

✫  Sheet Size: 12'' x 12'' (305 x 305 mm)
✫  The 12 inch width is ideal for most vinyl cutting machines, you can load it right onto the cutting mat or cut without a mat.
✫  Compatible with all craft cutters: Cricut, Silhouette, Xyron, Craft ROBO, Graphtec, and more
✫  Special PVC film (75 microns)
✫
Available
59 GLOSSY colours
✫  Great properties for processing on
cutting machines
✫  For short- and medium-term markings, letterings and decorations
✫  Polyacrylate, permanent
✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫
Can’t Find the Size you want?
Feel free to contact me about custom orders, mass quantities, other sizes, colour, etc.
✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫ ✫
Shipping details
We are shipping
worldwide.
But please be aware: if you make an order during the weekend, on Friday after the working hours the order will be shipped next working day.
Delivery time
The ordinary time of delivery is:
-           Inside the European Union is 7-14 days;
-           United States of America, Canada, Australia 15-30 days;
-           Russia, Ukraine – unpredictable
Description
Soft PVC film available both with glossy surface.
Release Paper
Silicone coated paper on one side, 135 g/m², which provides excellent weed-stripping properties. For white vinyl, a light blue silicone paper is used, to form a stronger contrast to lettering.
Adhesive
Poly acrylate, permanent
Area of use
Very well suited for use on cutting plotter systems in the production of short- and medium-term markings, inscriptions and decorations. Outdoor applications. Indoor exposure is almost unlimited. Glossy surface is additionally suitable for thermal transfer printing (with resin ribbons).
Technical Data
Thickness*
(without protective paper and adhesive) 75 micron
Dimensional stability
(FINAT TM 14) Adhered to steel, no measurable shrinkage in cross direction, in length 0,4 mm max.
Temperature resistance***
Adhered to aluminium, -40° C to +80° C, no variation
Water resistance
Adhered to aluminium, after 48h/23° C, no variation
Adhesive power*
(FINAT TM 1, after 24h, stainless steel) 16 N/25 mm
Tensile strength
(DIN EN ISO 527) Along: min. 19 MPa Across: min. 19 MPa
Elongation at break
(DIN EN ISO 527) Along: min. 130% Across: min. 150%
Application temperature
> +10° C
Service life by specialist application
Under vertical outdoor exposure (normal climate of Central Europe) Black / white: Transparent / coloured: Metallic: 4 years 3 years 3 years
* average ** in original packaging, at 20° C and 50% relative humidity *** normal climate of Central Europe
Note
Surfaces to which the material will be applied must be thoroughly cleaned and free from dust, grease or any other contamination that could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure. The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. Furthermore, the application information published by ORAFOL must be considered. The batch traceability according to ISO 9001 is possible on the basis of the roll number.
IMPORTANT NOTICE
All ORACAL® products are subject to careful quality control throughout the manufacturing process and are warranted to be of merchantable quality and free from manufacturing defects. Published information concerning ORACAL® products is based upon research which the Company believes to be reliable although such information does not constitute a warranty. Because of the variety of uses of ORACAL® products and the continuing development of new applications, the purchaser should carefully consider the suitability and performance of the product for each intended use, and the purchaser shall assume all risks regarding such use. All specifications are subject to change without prior notice. ORACAL® is a registered trademark of ORAFOL Europe GmbH.