Forney Easy Weld 261, 140 FC-i 120V Green

Description

Forney Easy Weld 261, 140 FC-i Welder, 120V, Green
About This Item
EASY TO USE-140 FC-I MIG machine uses 0.30, flux core wire. It has infinite voltage and wire feed speed control so you can dial in the perfect weld! Perfect entry level welder
POWERFUL- Up to 140 Amp output that allows you to weld mild steel up to 1/4 in plate
PORTABLE WELDER- Lightweight 19 lbs. easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project
RUGGED- All metal case, Built to take the day to day. Big enough to handle 2 and 10 pound rolls of wire
WELDER INCLUDES- 8' MIG gun, 8' ground clamp, Integrated handle with torch wrap and a 20A-15A adapter. Backed by a 12-month
PRODUCT SPECIFICATIONS- Dimensions: 16.75" (425.45 millimeters) x 8.125" (206.38 millimeters) x 12" (304.8 millimeters), Weight: 19 lbs. (8.62 kilograms), Gasless/flux-core welding only, Portable, Torch wrap, Infinite voltage and wire feed speed control, 120-volt input, 140 AMP output, Welds up to 1/4 in. (6.35 millimeters), Handles .030 in. or 0.35 in. wire, Includes: 8' MIG gun, 8' ground clamp and 20A - 15A adapter, Duty Cycle 30% @ 90A
RECOMMENDED ACCESSORIES- Contact Tips (60170, 60171 and 60172),Welding Nozzles: (85336 and 85337), Diffuser: (85339), Flux Core MIG Wire: (42300 and 42301), Anti-Spatter Spray: (37030), Nozzle Gel: (37031)
Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!
From the manufacturer
Forney Easy Weld 140 FC-i Welder
The Forney 140 welder is an impressive Flux-Core capable welder. Perfect for first time welders up to avid users. Applications include do-it-yourself projects, general metal fabrication, maintenance & repair, farm & ranch and automotive work.
Additional Features:
All metal case, can handle 2 and 10 pound rolls of wire
Easy to transport-only 19 lbs.
Integrated cable wrap
Can be used for mild steel
Range up to 120V input, 140 AMP Output
Quick Start Guide
1. Read User Manual
See User Manual for step-by-step picture illustrations for a quick set-up
2. Install Wire Spool
0.030" (0.8mm) diameter
3. Set Drive Roll
Face the side marked 0.030" away from the machine
4. Feed Wire and Set Pressure
For proper tension align the tops of the bolt and nut together
5. Connect to Input Power
30A breaker recommended with a 120VAC, 20A outlet. Extension cord: #12 AWG or larger; 25' (8m) or shorter
6. Remove Consumables
Depress trigger until wire comes our. Replace with consumables
7. Adjust Wire Feed and Volts
See chart on the welder for correct settings
8. Contact Tip 1/4" from Metal
When ready depress the trigger completely to initiate the arc
Domestic Shipping
Shipping
: Free domestic shipping to most addresses in the lower 48 states. All orders ships from our US-based warehouses in different locations/states.
International Customers:
International customers are responsible for all import duties and taxes charged by the desitination country.
Free Returns
Return is by eBay policy. Please contact us for RMA and FREE return label before returning the item to avoid shipping return to the wrong address.
Returns are not accepted after the 30-day of receiving the item
*******************************
Electronic Products:
Note for International Buyers
Please Note:
Our electronic products are manufactured according to the specifications of the US Electrical Standards and Codes. We do not recommend the use of this product outside of the USA.
We also, do not assume responsibility if this product does not work or malfunctions if it is used with foreign electrical standards. The use of this product outside of the USA is at the buyer's own risk.
Trust is important to us so, we will work with you to guarantee your satisfaction!
If you have any question, please through "
Contact Seller
" link. We will respond within 1-2 business days or less.
Please visit our eBay store to check out other items for sale!
Thank you for shopping with us!