Car Paintless Dent Repair Puller Kits Dent Removal Hail Damage Automotive Tools

Description

Package List:
1 x
G
olden M
etal D
ent L
ifter
1 x Rubber Hammer
1 x
Mini Glue Gun
1 x Flattening Pen
5 x Mini Black Glue Sticks
5 x Mini Yellow Glue Sticks
24 x Glue Tabs
1 x Mini Suction Cup
A) Rubber
Hammer & Mini Nylon Knock Pen Repair Set
Features:
√
S
uit for all kinds of flat metal dent
- such as the surface of automobile metal plate and the washing machine's metal plate
√ Avoid Scratches
- A versatile tool with detachable ends. Plastic and metal faces. If you work with metals, you will need a hammer with rubber and pl
astic heads to avoid scratches.
√ Stable And Smooth
- Lightweight tubular steel handle shifts the weight balance toward head for extra power in each blow.
√ Anti Slip
- Extra soft, non-slip rubber handle grip for ultimate comfort and control.
√ Perfect Selection
-
Handle made of steel, with ergonomic design, comfort grip, suitable for prolonged use.
B)
About Different Sizes Glue Puller Tabs
Specifications
Material: strengthen plastic
Features:
1. Different tabs for different dent lifter or the Slide Hammer, Works with All Glue Pullers
2. Unique small pits design, fit for Auto Body Dent Repair, this special face can bond the glue well, also clean it easily, the size can match perfectly with dent puller/lifter
3. Durable design allows for perfect placement and superior adherent properties
C)
Abou
t Golden Met
al D
ent L
i
f
ter:
1.Aluminum body
2. Stainless Steel Adjustment knob
3.Stainless Steel Nuts/Bolts/Pivot pin/E-Retaining clips
4. One screw on the top of the dent lifter is used to adjust the middle height of the dent lifter.
5. With sandblasting oxidation process, the smooth texture feels and outstanding looks, The product is very strong and durable.
6. On the bottom of the dent lifter is silicone, not ordinary rubber, which is very soft and not harmful for oil paint and can be torn down.
Note:
1. Use adjustable lifting-mode movable tripod pulle
r and adjust it against the size of the dent.
2.During operation, you need to adjust your force gradually until the position where the dent is located is pulled to the flat and recovered entirely.
3. The Dent Lifter squeeze trigger will allow you to control and massage door dings and hail damage until the desired results are achieved.
4.New material and new design, stronger material.
Step-By-Step Instructions for Repairing Car Paintless Dent:
1. Prep tabs by soaking them in 9
1% rubbing alcohol and drying them before first use.
2. Insert a glue stick into the glue
gun. Plugin the glue gun and allow it to heat up for 5 minutes.
3. Clean the area to be repaired with 91% isopropyl rubbing alcohol and a clean towel.
4. Select the correct sized dent pulling tab by comparing it to the size of the dent.
5. To save time when doing multiple repairs, glue and place all of the tabs at once on the vehicle, then do all of the repairs.
6. Apply hot glue to the dent pulling tab by pulling on the trigger of the glue gun until approximately a dime-sized amount of glue is released. Use a ?pea? sized drop of glue for smaller tabs and a dime size or slightly more for larger tabs.
7. Apply the dent pulling tab to the exact center of the dent.
8. Allow the glue to set for about 5 minutes. The glue should be hard to the touch at the time you begin the repair.
9. Slide the dent lifter device directly over the dent pulling tab shaft until the female adapter in the center of the dent lifter slides over the shaft of the tab. Adjust the height knob accordingly.
10. Squeeze the dent lifter handle slowly several times until the desired result is achieved. As the damage gets smaller, reduce the size of the dent pulling tab until the dent becomes flush.
11. Spray 91% rubbing alcohol on the edge of the glue and peel it away using the plastic scraper.
12. If a high spot is created, gently tap down any high spots using the dent hammer a
n
d the plastic tap down tool provided, until the dent is f
lush.
Warm Prompt
:
1. Keep clean of the glue sticks to avoid impurity block the nozzle, and do not pull out of the remanent glue sticks after each time using.
2. To avoid get an electric shock during use, do not use it in humid
environment and keep it away from children.?
3. The remaining pressure inside the glue gun will push a little molten glue out of the gun even stop use, so to save your glue, please control release the trigger or cut off the power in advance.
4. Cut off the power when stop using, and never try to disassemble the melt glue gun in any case.
About Logistics:
After receiving the payment, we will send your parcel from California within 2 days (usually within one day). You can usually receive the parcel in 4-7 days. The logistics is very fast, so don't worry.
About us:
We are from California, USA, and we are committed to building a good reputation to ensure that every customer is satisfied with us. Your satisfaction is our driving force. If you have any questions or comments about our products. please feel free to contact us.
We will try our best to satisfy customers. If you are not satisfied for any reason, please do not leave negative/neutral feedback soon.
We strive to ensure that every customer is 100% satisfied and solve any problems for you. ToIf you are not satisfied with this project. Please visit the store, there are more similar products waiting for you.