AV8X+ MIG SYNERGY SINGLE /DOUBLE PULSE WELDER

Description

AV8X+
INCLUDE:
1-AV8X+ MACHINE
1-TUNGSTEN
1-TIG TORCH
1-ARC STICK HOLDER
1-MIG SPOOL GUN(SWIVEL WIRE SPOOL CAGE)
1-MIG LINE FEED TORCH(AIR COOLED)
1-GROUND CABLE
1-ARGON REGULATORS
EXTRA 1 SET CONSUMABLES
Unitary gas shielded arc welding parameters(SYNC MIG)
Model
Item
SYNERGY MIG
Rated Amperage
60-200A
Material selection
Fe co2,Fe Ar82,AlMg5 Ar
AlSi5 Ar,E308 Ar98
Welding wire diameter
0.8,  1.0,   1.2
Operation mode(TRIG)
2T,4T,S2T,S4T,Spot,Cpot
Inductance(Forc)
-90% to 50%
Burn-back time(Burn)
-90% to 90%
Time for spot welding
0.1-9.9s
Soft starting speed(StFd)
1-13m
Spot welding stop time(stop)
0.1-25.5s
Preflow time of gas(Preg)
0-10s
Postflow time of gas(Post)
0.1-50s
Double pulse gas shielded arc welding(Double Pulse)
Model
Item
AV8X+ SYNERGY MIG200
Rated Amperage
200A
Material selection
AlMg5 Ar
AlSi5 Ar,
Fe co2,Fe Ar82,
E308 Ar98
Welding wire diameter
1.0,   1.2
0.8,  1.0
Operation mode(TRIG)
2T,4T,S2T,S4T,Spot,Cpot
Inductance(Forc)
-90% to 50%
Burn-back time(Burn)
-90% to 90%
Time for spot welding
0.1-9.9s
Pulse frequency(Freq)
0.5-5.0H
Duty ratio (Duty)
20%-80%
Pulse amplitude(Ip-p)
5%-50%
Basic arc length
-50% TO 50%
Peak arc length
-50% TO 50%
Soft starting speed(StFd)
1-13m
Spot welding stop time(stop)
0.1-25.5s
Preflow time of gas(Preg)
0-10s
Postflow time of gas(Post)
0.1-50s
Single pulse gas shielded arc welding (pulse MIG)
Model
Item
AV8X+ SYNERGY MIG
Rated Amperage
200A
Material selection
AlMg5 Ar
AlSi5 Ar,
Fe co2,Fe Ar82,
E308 Ar98
Welding wire diameter
1.0,   1.2
0.8,  1.0
Operation mode(TRIG)
2T,4T,S2T,S4T,Spot,Cpot
Peak amperage amplitude(Forc)
-99% to 50%
Burn-back time(Burn)
-90% to 90%
Time for spot welding
0.1-9.9s
Soft starting speed(StFd)
1-13m
Spot welding stop time(stop)
0.1-25.5s
Preflow time of gas(Preg)
0-10s
Postflow time of gas(Post)
0.1-50s
this machine MIGs like AC/DC TIG, Aluminum, SS Steel, Steel, alloys of all kinds. single or double pulse , can adjust it to get the stack dimes look , its amazing truly. can adjust pulse , up slope down slope, inductance, pulse frequency , burn back, hot start end current , to the gas blend using , phone app controllable , record , and we can diagnose the machine over the internet for the settings and such . this is a major break through in MIG welding like and identical to a TIG bead if needed in the job at hand , all other older MIGs will be considered nearly useless after you have used this MIG welder.
5 YEARS
WARRANTY!