130 MIG Welder Flux Core Wire Automatic Feed Welding Machine with Free Mask

Description

Specifications:
130 MIG Welder Flux Core Wire Automatic Feed Welding Machine with Free Mask
Specifications:
Brand: U`King
Model: ZQ-WJ002
Color: black, red
Supply voltage: 110 V ~ 240V (110V US / 230V European / 240V British)
Frequency: 50-60 Hz
Welding wire diameter: 0.6 ~ 0.9 mm
Input power: 2.5 kva
60% input power: 1.5 kva
Fuse (A): 13
Power factor: 0.9
Maximum no-load voltage output: 33V
Current range: 50-90A
Maximum current output: 90 @ 10%
Adjustment position: 4
Aluminum welding wire diameter: 0.8-0.9mm
Insulation class: H
Protection class: IP21S
Circuit breaker: 30A
Description: AC single-phase portable wire welding machine for flux (NO GAS) welding. With thermal protection.
Feature:
1. The shell is made of powder coated steel sheet.
2. Single-phase portable fan cooling wire welding machine, 2 switch stages, easy to operate.
3. Provide stable welding current effect, including thermal overload protection, safe to use.
4. less maintenance, less harmful gases, can be used for a long time.
5. High efficiency, low consumption, energy saving, low noise, high load cycle, forced cooling.
6. suitable for MIG welding, low carbon steel, medium carbon steel, alloy steel and other metal welding widely used.
Notes:
1. MIG-100 welding machine has the function of gas-free AC. Welds up to 1kg of wire. Take care to assemble the correct sized wires when using them.
2. When the torch nozzle hits the workpiece, an arc will start. When you press the torch button, it will start wire feeding and welding. Therefore, when you are not welding, do not allow the nozzle to blow weld the workpiece.
3. The contact head is a consumable product. It must be replaced when the hole becomes large or oval. The contact tip must avoid splashing.
4. The nozzle must also be kept clean and free of splashes. The accumulation of spatter inside the nozzle can cause a short-circuit of the contact tip, which can lead to expensive machine maintenance costs. Keep the contacts from splashing.
5. Thermal protection: If the welding machine is overheated due to long-term use beyond the initial duty cycle within the specified duty cycle, the thermal protection will cause the welding machine to cut off and the orange indicator light on the front panel will light up. Wait fifteen minutes to allow the welder to cool down, at which point the welder will automatically reconnect.
Note: The instructions are placed inside the welding machine. You need to pull the slide bar with both hands to open the cover of the welding machine and remove the instructions.
Security Information:
1. Pay attention to safety when using, arc welding may be dangerous. Arc light and molten iron will burn. Welding sparks may cause fire or explosion. Fumes and welding gas electromagnetic fields can be dangerous. Electric shock can cause death.
2. The welding machine must be connected to a power source in accordance with the electrical specifications of the equipment.
3. Disconnect the power before assembling, disassembling or servicing the torch or contacts or replacing the spool.
4. Always install a gas nozzle when welding. Do not perform welding without a gas nozzle installed. The contact tip is electrically "hot" and can cause damage if it comes into contact with a compacted workpiece.
5. Be sure to wear all protective devices before welding in a safe place.
Tip: MIG welding is relatively easy, but it requires stable and supervised operations on scrap metal, because you can only get the results you need if you continue to operate.
Packing list:
1x welding machine (including power cord)
1x mask
1x brush
1x gadget
1x English User Manual
Payment
1. Accept a payment on Paypal Only.
2.Payment must be made within 4 ~ 7 days of auction closing.
3.Total amount due includes the final auction price plus S & H (Shipping and Handling)
4.S & H will be determined based upon the Ship to address.
Please note: S & H does not include duties, locatl taxes or any other importation fees.
5.Please list your special requests (color, packages, etc.) in the PAYPAL NOTES SECTION when you make payment.
Shipping
1. Item will be shipped within 24 - 48 business hours after full payment is received. (Attention:excludes weekends and holidays)
2. We only ship to confirmed eBay addresses. Your eBay address MUST MATCH your Shipping address.
3. If you have not received your shipment within 35 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
4.Local pick up is not available.
Returns
1.This product comes with 30-Day Money Back Guarantee.
2.If you receive an item and it does not work properly or you do not like it because of any reason at all, we have a 100% refund / return policy. We will ship you a new item or refund your money for the full Sale amount.
3.For all returned products, buyers MUST contact us for the returning address.
Contact Us
1. We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
As you know it is impossible to address issues if we do not know about them!
2. We will reply you in 24 hours on business days , and 48 hours on weekends, please note the time difference, so,kindly don't take any action on eBay before getting a reply from us.
3. If you are satisfied with our products and service, please do not forget to leave a good review to us, thanks!
Bicyle
Stage Lighitng
Headlamp
Flashlight& Torch
Consumer Electronics
130 MIG Welder Flux Core Wire Automatic Feed Welding Machine with Free Mask
Specifications:
Brand: U`King
Model: ZQ-WJ002
Color: black, red
Supply voltage: 110 V ~ 240V (110V US / 230V European / 240V British)
Frequency: 50-60 Hz
Welding wire diameter: 0.6 ~ 0.9 mm
Input power: 2.5 kva
60% input power: 1.5 kva
Fuse (A): 13
Power factor: 0.9
Maximum no-load voltage output: 33V
Current range: 50-90A
Maximum current output: 90 @ 10%
Adjustment position: 4
Aluminum welding wire diameter: 0.8-0.9mm
Insulation class: H
Protection class: IP21S
Circuit breaker: 30A
Description: AC single-phase portable wire welding machine for flux (NO GAS) welding. With thermal protection.
Feature:
1. The shell is made of powder coated steel sheet.
2. Single-phase portable fan cooling wire welding machine, 2 switch stages, easy to operate.
3. Provide stable welding current effect, including thermal overload protection, safe to use.
4. less maintenance, less harmful gases, can be used for a long time.
5. High efficiency, low consumption, energy saving, low noise, high load cycle, forced cooling.
6. suitable for MIG welding, low carbon steel, medium carbon steel, alloy steel and other metal welding widely used.
Notes:
1. MIG-100 welding machine has the function of gas-free AC. Welds up to 1kg of wire. Take care to assemble the correct sized wires when using them.
2. When the torch nozzle hits the workpiece, an arc will start. When you press the torch button, it will start wire feeding and welding. Therefore, when you are not welding, do not allow the nozzle to blow weld the workpiece.
3. The contact head is a consumable product. It must be replaced when the hole becomes large or oval. The contact tip must avoid splashing.
4. The nozzle must also be kept clean and free of splashes. The accumulation of spatter inside the nozzle can cause a short-circuit of the contact tip, which can lead to expensive machine maintenance costs. Keep the contacts from splashing.
5. Thermal protection: If the welding machine is overheated due to long-term use beyond the initial duty cycle within the specified duty cycle, the thermal protection will cause the welding machine to cut off and the orange indicator light on the front panel will light up. Wait fifteen minutes to allow the welder to cool down, at which point the welder will automatically reconnect.
Note: The instructions are placed inside the welding machine. You need to pull the slide bar with both hands to open the cover of the welding machine and remove the instructions.
Security Information:
1. Pay attention to safety when using, arc welding may be dangerous. Arc light and molten iron will burn. Welding sparks may cause fire or explosion. Fumes and welding gas electromagnetic fields can be dangerous. Electric shock can cause death.
2. The welding machine must be connected to a power source in accordance with the electrical specifications of the equipment.
3. Disconnect the power before assembling, disassembling or servicing the torch or contacts or replacing the spool.
4. Always install a gas nozzle when welding. Do not perform welding without a gas nozzle installed. The contact tip is electrically "hot" and can cause damage if it comes into contact with a compacted workpiece.
5. Be sure to wear all protective devices before welding in a safe place.
Tip: MIG welding is relatively easy, but it requires stable and supervised operations on scrap metal, because you can only get the results you need if you continue to operate.
Packing list:
1x welding machine (including power cord)
1x mask
1x brush
1x gadget
1x English User Manual
Payment
1. Accept a payment on Paypal Only.
2.Payment must be made within 4 ~ 7 days of auction closing.
3.Total amount due includes the final auction price plus S & H (Shipping and Handling)
4.S & H will be determined based upon the Ship to address.
Please note: S & H does not include duties, locatl taxes or any other importation fees.
5.Please list your special requests (color, packages, etc.) in the PAYPAL NOTES SECTION when you make payment.
Shipping
1. Item will be shipped within 24 - 48 business hours after full payment is received. (Attention:excludes weekends and holidays)
2. We only ship to confirmed eBay addresses. Your eBay address MUST MATCH your Shipping address.
3. If you have not received your shipment within 35 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
4.Local pick up is not available.
Returns
1.This product comes with 30-Day Money Back Guarantee.
2.If you receive an item and it does not work properly or you do not like it because of any reason at all, we have a 100% refund / return policy. We will ship you a new item or refund your money for the full Sale amount.
3.For all returned products, buyers MUST contact us for the returning address.
Contact Us
1. We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
As you know it is impossible to address issues if we do not know about them!
2. We will reply you in 24 hours on business days , and 48 hours on weekends, please note the time difference, so,kindly don't take any action on eBay before getting a reply from us.
3. If you are satisfied with our products and service, please do not forget to leave a good review to us, thanks!
All rights reserved.
Powered by SoldEazy